Connection is achieved through heating and deformation
The working principle of rivets is to achieve connection through heating and deformation. During the installation process, one end of the rivet is heated to a high temperature and then inserted into the material to be connected. The rivet is positioned by air pressure using a riveting machine, and pressure is applied at the other end to penetrate the two layers of material to form a composite structure. After cooling, the two ends of the rivet will be embedded in the connected materials to form a high-strength and high-tightness connection.
The installation process of rivets includes placing the rivet in a punched or drilled hole and using a riveting machine to upset or bend its tail and expand it to about 1.5 times the original shaft diameter, thereby fixing it in place. There are many types of rivets, and the most common ones are solid rivets, semi-hollow rivets, and blind rivets. Blind rivets are particularly suitable for occasions where ordinary rivets are inconvenient to use, and are widely used in products such as construction, automobiles, ships, and aircraft.
Rivets are widely used in engineering, especially in metal frame buildings such as the Eiffel Tower and the Golden Gate Bridge. In addition, riveting is also often used in car chassis.


